Embedded client

EmbeddedVNodeBuilder

The EmbeddedVNodeBuilder class sets up and builds an EventStoreDB node. You can configure your node through methods provided by the EmbeddedVNodeBuilder class.

Tips

The builder used for the EmbeddedVNodeBuilder is the same EventStoreDB uses internally to create the ClusterNode, see EventStore.ClusterNode.Program.cs for more examples on how to use it.

You have two options when you start creating a node, EmbeddedVNodeBuilder.AsSingleNode() or EmbeddedVNodeBuilder.AsClusterMember(clusterSize), which will create a single node or a cluster node respectively. After creating the builder, you can configure the node through the methods provided by the EmbeddedVNodeBuilder. These are listed below.

Once you have configured the node, build it with EmbeddedVNodeBuilder.Build() which returns the configured ClusterVNode.

Start the node with ClusterVNode.StartAndWaitUntilReady() or ClusterVNode.Start(). ClusterVNode.StartAndWaitUntilReady() returns a task that completes once the node has started and all subsystems have finished loading.

For example, to build a single node with default options :

var nodeBuilder = EmbeddedVNodeBuilder
    .AsSingleNode()
    .OnDefaultEndpoints() 
    .RunInMemory();

var node = nodeBuilder.Build();
await node.StartAndWaitUntilReady();

To build a node to be part of a cluster with custom endpoints and gossip seeds:

var nodeBuilder = EmbeddedVNodeBuilder
    .AsClusterMember(3)
    .RunOnDisk("node1db")
    .WithInternalHttpOn(new IPEndPoint(IPAddress.Loopback, 1112))
    .WithExternalHttpOn(new IPEndPoint(IPAddress.Loopback, 1113))
    .WithExternalTcpOn(new IPEndPoint(IPAddress.Loopback, 1114))
    .WithInternalTcpOn(new IPEndPoint(IPAddress.Loopback, 1115))
    .DisableDnsDiscovery()
    .WithGossipSeeds(new IPEndPoint[]
    {
        new IPEndPoint(IPAddress.Loopback, 2112),
        new IPEndPoint(IPAddress.Loopback, 3112)
    });
var node = nodeBuilder.Build();
node.Start();

Warning

When running an embedded cluster, the task returned by StartAndWaitUntilReady() only completes on the master node.

Connecting to an embedded node

You can connect to an embedded EventStoreDB node with the EmbeddedEventStoreConnection class. Calling EmbeddedEventStoreConnection.Create(ClusterVNode) returns an IEventStoreConnection configured to connect to your embedded node. From there you can use the connection as normal in the .NET Client.

using var embeddedConn = EmbeddedEventStoreConnection.Create(node);

await embeddedConn.ConnectAsync();
await embeddedConn.AppendToStreamAsync(
    "some-stream", 
    ExpectedVersion.Any,
    new EventData(Guid.NewGuid(), "eventType", true,
    Encoding.UTF8.GetBytes("{\"Foo\":\"Bar\"}"), null)
);

Logging with an embedded node

To enable logging for an embedded node, you need to initialize the LogManager and ensure that you configure the logger with a log.config file in your configuration directory.

To initialize the LogManager, call this before building the nodes:

LogManager.Init(logComponentName, logDirectory, logConfigurationDirectory);

EmbeddedVNodeBuilder options

The following options are available when building an Embedded Node.

Application options

Method	Description
`AsSingleNode()`	Returns a builder set to construct options for a single node instance
`AsClusterMember(int clusterSize)`	Returns a builder set to construct options for a cluster node instance with a cluster size
`DisableHTTPCaching()`	Disable HTTP Caching
`WithWorkerThreads(int count)`	Sets the number of worker threads to use in shared threadpool
`WithStatsPeriod(TimeSpan statsPeriod)`	Sets the period between statistics gathers
`EnableLoggingOfHttpRequests()`	Enable logging of HTTP requests and responses before they are processed
`EnableHistograms()`	Enable the tracking of histograms, typically used for debugging
`EnableTrustedAuth()`	Enable trusted authentication by an intermediary in the HTTP

Certificate options

Method	Description
`WithServerCertificateFromFile(string path, string password)`	Sets the Server SSL Certificate loaded from a file
`WithServerCertificate(X509Certificate2 sslCertificate)`	Sets the Server SSL Certificate
`WithServerCertificateFromStore(StoreLocation storeLocation, StoreName storeName, string certificateSubjectName, string certificateThumbprint)`	Sets the Server SSL Certificate loaded from a certificate store
`WithServerCertificateFromStore(StoreName storeName, string certificateSubjectName, string certificateThumbprint)`	Sets the Server SSL Certificate loaded from a certificate store

Cluster options

Method	Description
`WithClusterGossipPort(int port)`	Sets the internal gossip port (used when using cluster DNS, this should point to a known port gossip will be running on)
`WithGossipSeeds(params IPEndPoint[] endpoints)`	Sets the gossip seeds this node should talk to
`WithClusterDnsName(string name)`	Sets the DNS name used for the discovery of other cluster nodes
`DisableDnsDiscovery()`	Disable DNS discovery for the cluster
`WithGossipInterval(TimeSpan gossipInterval)`	Sets the gossip interval
`WithGossipAllowedTimeDifference(TimeSpan gossipAllowedDifference)`	Sets the allowed gossip time difference
`WithGossipTimeout(TimeSpan gossipTimeout)`	Sets the gossip timeout
`WithPrepareTimeout(TimeSpan prepareTimeout)`	Sets the prepare timeout
`WithCommitTimeout(TimeSpan commitTimeout)`	Sets the commit timeout
`WithPrepareCount(int prepareCount)`	Sets the number of nodes which must acknowledge prepares.
`WithCommitCount(int commitCount)`	Sets the number of nodes which must acknowledge commits before acknowledging to a client.
`WithNodePriority(int nodePriority)`	Sets the node priority used during master election

Database options

Method	Description
`RunInMemory()`	Sets the builder to run in memory
`RunOnDisk(string path)`	Sets the builder to write database files to the specified path
`MaximumMemoryTableSizeOf(int size)`	Sets the maximum size a memtable is allowed to reach (in count) before moved to be a ptable
`DoNotVerifyDbHashes()`	Marks that the existing database files should not be checked for checksums on startup.
`VerifyDbHashes()`	Marks that the existing database files should be checked for checksums on startup.
`WithMinFlushDelay(TimeSpan minFlushDelay)`	Sets the minimum flush delay
`DisableScavengeMerging()`	Disables the merging of chunks when scavenge is running
`WithScavengeHistoryMaxAge(int scavengeHistoryMaxAge)`	The number of days to keep scavenge history (Default: 30)
`WithIndexPath(string indexPath)`	Sets the path the index should be loaded or saved to
`WithIndexCacheDepth(int indexCacheDepth)`	Sets the depth to cache for the mid point cache in index
`WithUnsafeIgnoreHardDelete()`	Disables Hard Deletes (UNSAFE: use to remove hard deletes)
`WithUnsafeDisableFlushToDisk()`	Disables Hard Deletes (UNSAFE: use to remove hard deletes)
`WithBetterOrdering()`	Enable queue affinity on reads during write process to try to get better ordering.
`WithTfChunkSize(int chunkSize)`	Sets the transaction file chunk size. Default is `TFConsts.ChunkSize`
`WithTfCachedChunks(int cachedChunks)`	The number of chunks to cache in unmanaged memory. Default is `TFConsts.ChunksCacheSize`

Interface options

Method	Description
`OnDefaultEndpoints()`	Sets the default endpoints on localhost (1113 tcp, 2113 http)
`AdvertiseInternalIPAs(IPAddress intIpAdvertiseAs)`	Sets up the Internal IP to advertise
`AdvertiseExternalIPAs(IPAddress extIpAdvertiseAs)`	Sets up the External IP to advertise
`AdvertiseInternalHttpPortAs(int intHttpPortAdvertiseAs)`	Sets up the Internal HTTP port to advertise
`AdvertiseExternalHttpPortAs(int extHttpPortAdvertiseAs)`	Sets up the External HTTP port to advertise
`AdvertiseInternalSecureTCPPortAs(int intSecureTcpPortAdvertiseAs)`	Sets up the Internal Secure TCP port to advertise
`AdvertiseExternalSecureTCPPortAs(int extSecureTcpPortAdvertiseAs)`	Sets up the External Secure TCP port to advertise
`AdvertiseInternalTCPPortAs(int intTcpPortAdvertiseAs)`	Sets up the Internal TCP port to advertise
`AdvertiseExternalTCPPortAs(int extTcpPortAdvertiseAs)`	Sets up the External TCP port to advertise
`WithInternalHttpOn(IPEndPoint endpoint)`	Sets the internal HTTP endpoint to the specified value
`WithExternalHttpOn(IPEndPoint endpoint)`	Sets the external HTTP endpoint to the specified value
`WithInternalTcpOn(IPEndPoint endpoint)`	Sets the internal TCP endpoint to the specified value
`WithInternalSecureTcpOn(IPEndPoint endpoint)`	Sets the internal secure TCP endpoint to the specified value
`WithExternalTcpOn(IPEndPoint endpoint)`	Sets the external TCP endpoint to the specified value
`WithExternalSecureTcpOn(IPEndPoint endpoint)`	Sets the external secure TCP endpoint to the specified value
`EnableSsl()`	Sets that SSL should be used on connections
`WithSslTargetHost(string targetHost)`	Sets the target host of the server's SSL certificate.
`ValidateSslServer()`	Sets whether to validate that the server's certificate is trusted.
`NoGossipOnPublicInterface()`	Disables gossip on the public (client) interface
`NoAdminOnPublicInterface()`	Disables the admin interface on the public (client) interface
`NoStatsOnPublicInterface()`	Disables statistics screens on the public (client) interface
`AddInternalHttpPrefix(string prefix)`	Adds a HTTP prefix for the internal HTTP endpoint
`AddExternalHttpPrefix(string prefix)`	Adds a HTTP prefix for the external HTTP endpoint
`DontAddInterfacePrefixes()`	Don't add the interface prefixes (e.g. If the External IP is set to the Loopback address, add `http://localhost:2113/` as a prefix)
`WithInternalHeartbeatInterval(TimeSpan heartbeatInterval)`	Sets the heartbeat interval for the internal network interface.
`WithExternalHeartbeatInterval(TimeSpan heartbeatInterval)`	Sets the heartbeat interval for the external network interface.
`WithInternalHeartbeatTimeout(TimeSpan heartbeatTimeout)`	Sets the heartbeat timeout for the internal network interface.
`WithExternalHeartbeatTimeout(TimeSpan heartbeatTimeout)`	Sets the heartbeat timeout for the external network interface.

Projections options

Method	Description
`StartStandardProjections()`	Start standard projections.
`RunProjections(ProjectionType projectionType, int numberOfThreads = Opts.ProjectionThreadsDefault)`	Sets the mode and the number of threads on which to run projections.
`RunProjections(ClientAPI.Embedded.ProjectionsMode projectionsMode, int numberOfThreads = Opts.ProjectionThreadsDefault)`	Sets the mode and the number of threads on which to run projections.

EmbeddedEventStoreConnection

The following methods are available on EmbeddedEventStoreConnection for connecting to an embedded node.

Method	Description
`Create(ClusterVNode eventStore, string connectionName = null)`	Creates a new embedded `IEventStoreConnection` to a single node with default connection settings
`Create(ClusterVNode eventStore, ConnectionSettings connectionSettings, string connectionName = null)`	Creates a new embedded `IEventStoreConnection` to a single node using specific `ConnectionSettings`